View our Amazing Products
-
Downhill Dan 10
The Downhill Dan 10 profile is our most compact lighting system. At only 10mm deep, it’s ideal for tight spaces and minimal visual impact. Downhill Dan 10 can be surface mounted or recessed. The concealed mounting clip provides a quick and secure fixing to joinery surfaces.
-
Downhill Dan 14
The Downhill Dan 14 profile is a compact solution providing “dot-free” lighting. A versatile system suitable for various mounting options, Downhill Dan 14 can be surface mounted, recessed or suspended.
-
Downhill Dan 22
The Downhill Dan 22 profile is our most powerful downlighting system. Utilizing two LED ribbon strips mounting in parallel, this profile is ideal for applications where maximum output is key. Both wire and rod suspension options are available and a simple method of recessing into plasterboard ceilings provides a clean, trimless look.
-
Downhill Dan 30
The Downhill Dan 30 extrusion is a versatile and powerful downlighting system. Utilizing up to a 2986 lumen per metre LED strip, the profile is ideal for applications where maximum light output is key. A versatile system suitable for various mounting options, Downhill Dan 30 can be surface mounted, recessed suspended or wall mounted. Both wire and rod suspension options are available and the cowling accessory for plastered ceilings and walls creates a perfect trimless finish every time.
-
Downhill Dan 35
Downhill Dan 35 is a quick-to-install, recessed down-lighter profile. The asymmetric mounting bracket makes this product unique and means that it can be installed with the LED strip already attached. Downhill Dan 35 has plenty of power for a huge range of applications. Silver anodised or white powder coat are standard finish options.
-
Flat Freddie 14
Much like its close cousin, Downhill Dan 14, Flat Freddie 14 is a compact solution providing “dot-free” lighting. A versatile system suitable for various mounting options, Flat Freddie 14 can be surface mounted, recessed or suspended. Both wire and rod suspension options are available and a simple method of recessing into plasterboard ceilings provides a clean, trimless look.
-
Flat Freddie 30
The Flat Freddie 30 extrusion is a close cousin of Downhill Dan 30, but with a squarer profile for a more architectural look. It also features a more efficient diffuser for maximum output. Utilizing up to a 26W per metre LED strip, the profile is ideal for applications where maximum light output is key. A versatile system suitable for various mounting options, Flat Freddie 30 can be surface mounted, recessed and suspended. Both wire and rod suspension options are available and the cowling accessory for plastered ceilings and walls creates a beautiful trimless finish.
-
Flat Freddie 35
Flat Freddie 35 is a versatile profile suitable for a huge range of applications. Designed in conjunction with our Spec Series RGB+Twin White LED strip, in combination Flat Freddie 35 offers a unique combination of a powerful white light with an independent RGB light – great for residential or hospitality applications.
-
Slim Jim 10
At only 11.5mm wide, Slim Jim 10 is a miniature profile designed for those tricky little spots – stair nosings, small cabinetry details and more. With the Spec Series Slim 9.6W IP65 LED Strip, Slim Jim 10 can even be used in exterior applications.
-
Tiny Tim 11
Tiny Tim 11 is a unique, low-profile joinery extrusion with a recessed diffuser which drastically reduces glare. At only 11mm deep, Tiny Tim 11 can be used in slim joinery carcasses. For “dot-free” lighting, our “Spec Series Slim” LED strip is the perfect accompaniment.
-
Trim Tim 13
Trim Tim 13 has similar dimensions and features to Downhill Dan 14 with the added feature of recessing trims to cover the cut edges of joinery when recessing. Also featured are small ribs either side of the profile which allow Trim Tim 13 to be friction-fitted into an 18mm routed slot in joinery without the need for screws. The 13mm depth provides “dot-free” lighting in building materials as thin as 18mm.
-
Trim Tim 7
Trim Tim 7 is the slimmer cousin of Trim Tim 13. Designed for ultra-thin joinery where a shallow recess is critical, Trim Tim 7 offers the same benefits as Trim Tim 13 including ribs for friction-fitting but in a smaller package.
-
Trimless Tim 15
Trimless Tim 15 is designed to recess seamlessly into joinery to offer dot-free lighting solutions. The small ribs either side of the profile allow Trimless Tim 15 to be friction-fitted into an 18mm routed slot in joinery without the need for screws. The flat diffuser provides an excellent, flush, high-level finish to the installation.
-
Where’s Ben 14
The Where’s Ben 14 profile is the perfect solution for wall-washing, ceiling-washing or floor-washing. It creates an even wash of light on to a perpendicular surface meaning it is ideal for lighting art work, or brightening up dark walls or ceilings. Where’s Ben 14 can be surface mounted or recessed.
-
Where’s Ben 25
The Where’s Ben 25 profile is a Fully Integrated Architectural, lighting solution. Designed to be recessed into the corner of perpendicular walls or into the corner of a wall and ceiling, Where’s Ben 25 offers a unique and subtle architectural detail.
